INSTALLER

The MNSTAR Installer Series is a fabricated wire harness that uses traditional installation methods of in-line fuses, fuse blocks in the console and the trunk. Designed to provide uniformity for your fleet and flexibility for the vehicle up-fitter, MNSTAR’s Installer Series is the Industry Volume Leader.

Overview

• Traditional Installation Method for Customer Choice - High or Low Current Switching
• Fabricated Wire Harness of High Quality TXL Copper Exceeds SAE Standard J-1128
• Heat Rated: Tested for Maximum Loads at -40°F to 221°F  for 110 Amp Continuous Service
• Fire Retardant Protective Loom provides uniform high quality appearance and consistency to final installation.
• Color Coded Labelled Wires for easy circuit identification - Providing quicker installations, trouble-shooting and service.
• Flexible Spare Circuits - Installation provider designates protection and layout according to customer needs.
• Detailed Color Schematics are provided with every harness allowing installers to provide fleet-wide consistency.
• Direct to Battery Grounds adhere to equipment manufacturer recommendations for optimum component performance.
• All Installer Series Harnesses are available with or without integrated Strobe Cables.
• 14 Harness Configurations are available from inventory to support customers immediate needs no matter how diverse the fleet.

Available Harnesses In The Installer Series

EDH1500	Installer Harness - Console Switching with Strobe Cables	Wire Harness for a Switchbox and Siren mounted in the center console with 2 strobe cables to front corners.
EDH1510	Installer Harness - Console Switching	Wire Harness for a Switchbox and Siren mounted in the center console. Power, Ground and Triggers are provided for Strobe Power Supply.
EDH1516	Installer swing arm harness with integrated trunk mounted fuse pannel.
EDH1600	Installer Harness - Trunk mounted serial control with Strobe Cables	Wire Harness for a trunk mounted serial control with 2 strobe cables to front corners.
EDH1610	Installer for Trunk Mounted Sirens & Switchboxes - Front Battery Vehicles	Wire Harness for a trunk mounted serial control.
EDH1700	Installer Harness - Dodge Console Switching or Trunk Serial Control with Strobe Cables	Wire Harness for a Switchbox and Siren mounted in the center console or trunk mounted serial control system with 2 strobe cables to front corners.
EDH1710	Installer Harness - Dodge Console Switching or Trunk Serial Control	Wire Harness for a Switchbox and Siren mounted in the center console or trunk mounted serial control system. Power, Ground and Triggers are provided for Strobe Power Supply.
EDH1900	Installer Harness - Console Switching or Trunk Serial Control with Strobe Cables	Wire Harness for a Switchbox and Siren mounted in the center console OR a Trunk mounted serial control system with 2 strobe cables to front corners.
EDH1910	Installer Harness - Console Switching or Trunk Serial Control	Wire Harness for a Switchbox and Siren mounted in the center console OR a Trunk mounted serial control system.
EDH50	Utility Truck with minimal lighting and radios or other fused equipment.	Designed for light truck application, power and ground to center stack, small fuse block under hood.
EDH50V	Utility Van with minimal lighting and radios or other fused equipment.	Designed for light van application, power and ground to center stack, small fuse block under hood.
EDH1000	Unmarked/Federal Vehicle	Installer for Unmarked and Federal Agency Applications - Integrated Trunk Mount Fuse Panel.