|
Click on thumbnails to see larger images.
Available Harnesses
|
EDH1500
|
Installer Harness - Console Switching with Strobe Cables
|
Wire Harness for a Switchbox and Siren mounted in the center console with 2 strobe cables to front corners.
|
 |
|
EDH1510
|
Installer Harness - Console Switching
|
Wire Harness for a Switchbox and Siren mounted in the center console. Power, Ground and Triggers are provided for Strobe Power Supply.
|
|
|
EDH1516
|
Installer swing arm harness with integrated trunk mounted fuse pannel.
|
|
|
|
EDH1600
|
Installer Harness - Trunk mounted serial control with Strobe Cables
|
Wire Harness for a trunk mounted serial control with 2 strobe cables to front corners.
|
|
|
EDH1610
|
Installer for Trunk Mounted Sirens & Switchboxes - Front Battery Vehicles
|
Wire Harness for a trunk mounted serial control.
|
|
|
EDH1700
|
Installer Harness - Dodge Console Switching or Trunk Serial Control with Strobe Cables
|
Wire Harness for a Switchbox and Siren mounted in the center console or trunk mounted serial control system with 2 strobe cables to front corners.
|
|
|
EDH1710
|
Installer Harness - Dodge Console Switching or Trunk Serial Control
|
Wire Harness for a Switchbox and Siren mounted in the center console or trunk mounted serial control system. Power, Ground and Triggers are provided for Strobe Power Supply.
|
|
|
EDH1900
|
Installer Harness - Console Switching or Trunk Serial Control with Strobe Cables
|
Wire Harness for a Switchbox and Siren mounted in the center console OR a Trunk mounted serial control system with 2 strobe cables to front corners.
|
|
|
EDH1910
|
Installer Harness - Console Switching or Trunk Serial Control
|
Wire Harness for a Switchbox and Siren mounted in the center console OR a Trunk mounted serial control system.
|
|
|
EDH50
|
Utility Truck with minimal lighting and radios or other fused equipment.
|
Designed for light truck application, power and ground to center stack, small fuse block under hood.
|
|
|
EDH50V
|
Utility Van with minimal lighting and radios or other fused equipment.
|
Designed for light van application, power and ground to center stack, small fuse block under hood.
|
|
|
EDH1000
|
Unmarked/Federal Vehicle
|
Installer for Unmarked and Federal Agency Applications - Integrated Trunk Mount Fuse Panel.
|
|
Power Source - Designed for use at the Battery.
|
PS-A4-A
|
Protector Distribution Center
|
Under the hood fuse panel with four maxi fuses, connectors, heat shrink, master switch and 4ga. cable to connect to battery.
|
|
|
PS-G6-A
|
Protector Distribution Center
|
Under the hood fuse panel with mounting plate, six maxi fuses, fuse cover, two 40 amp ignition relays, connectors, heat shrink, master switch and 4ga. cable to connect to battery.
|
 |
|
PS-G6-B
|
Protector Distribution Center
|
Under the hood fuse panel with mounting plate, six maxi fuses, fuse cover, two 40 amp ignition relays, connectors and heat shrink.
|
|
|
PF-CT
|
Protector Battery Feed Cable
|
A 98” battery cable extension - 4 ga. power and ground from driver-side battery to the passenger-side of engine compartment.
|
|
Power Distribution - Designed for use in the console, passenger compartment, or trunk.
|
PD-B6
|
Protector Distribution Center 6C
|
Covered Fuse Panel, 100 Amp Power and Ground Studs, Screw Terminal Connections, six ATO Fused Outputs, & Metalized Label.
|
 |
|
PD-B12
|
Protector Distribution Center 12C
|
Covered Fuse Panel, 100 Amp Power and Ground Studs, Screw Terminal Connections, 12 ATO Fused Outputs & Metalized Label.
|
 |
|
PR-C8
|
Protector Distribution Center 8 Output
|
8 Fused Circuits, 2 -20 Amp Relays, Power & Ground Studs, Terminal Strip.
|
 |
|
PR-D14
|
Protector Distribution Center 14 Output
|
14 Fused Outputs, 4 - 30 Amp Relays, Power & Ground Studs.
|
 |
|
PR-E15
|
Protector Distribution Center 15 Output
|
15 Fused Outputs, 4- 40 Amp Relays, Power & Ground Studs, Terminal Strip.
|
 |
Master Switch Options - Upgrades and Options For Main Power Disconnect and Service Cut-Offs.
|
10-1528
|
Master Switch Cable 6ga. W/Fuse & Switch
|
Master switch with main fuse and a 16” 6ga. battery feed cable.
|
|
|
00-1447
|
Master Switch (High Temp)
|
Manual master switch for high temperature environments.
|
|
|
10-1421
|
Master Relay 200 Amp
|
200 amp solenoid or relay to switch emergency system power on and off.
|
|
|
10-1529
|
6Ga. Master Switch Cable
|
16” 6ga. battery feed cable to connect master switch or master relay.
|
|
|
X85-0047
|
40 Amp Relay
|
40 amp relay to switch on ignition power or other accessories.
|
|
|
00-1055
|
40 Amp Relay Connector Kit
|
Relay Connector and terminals for a 40 amp bracketed relay.
|
|
Siren Speaker Options
|
00-1375
|
Siren Speaker 2 Cable
|
Cable for Second Grill Speaker with speaker connector kit 00-1279.
|
|
Console Options
|
DR29
|
Diode Adapter 6amp
|
The DR29 Diode Adapter will allow two separate switch inputs to operate one output or light. Rated for 6 amps.
|
|
|
DR33
|
Programmable Delay Timer
|
Dual timers built into one. One timer with two 25 amp circuits with 2-4 hour timed disconnect for MDT, radio, laptop, etc. and one timer with a 5 amp circuit with 8-10 hour timed disconnect for portable radio, flashlight, etc.
|
|
|
00-1138
|
Console Power Port
|
Two panel mount power outlets to mount on console for radar, inverter etc.
|
|
|
00-1169
|
Heavy Duty Foot Switch
|
Momentary foot switch mounted under carpet for gun locks, push to talk, or hands free horn ring.
|
|
|
00-1207
|
Console Fuse Assembly
|
Dual inline fuse assembly to expand one circuit into two fused circuits.
|
|
|
00-1750
|
Dodge PEIM connectors with pins
|
White and grey connectors to integrate Dodge PEIM module.
|
|
Gunlock Options
|
00-1376
|
Gunlock Harness
|
Cable for gun lock with lock connector kit 00-1282.
|
|
|
00-1282
|
Accessory Connector Kit
|
Kit containing connector & terminals for gunlock, dome lit, dash lit, deck lit, etc.
|
|
|
00-1378
|
Rear Gunlock Harness
|
Harness to add gunlock, timer & release button to rear of vehicle or trunk with connector kit 00-1282 for gunlock.
|
|
Rear Options
|
X85-0047
|
40 Amp Relay
|
40 amp relay to switch on ignition power or other accessories.
|
|
|
00-1055
|
40 Amp Relay Connector Kit
|
Relay Connector and terminals for a 40 amp bracketed relay.
|
|
|
00-1605
|
Trunk Lid Warning Light Harness
|
Harness to attach warning lights on underside of trunk lid. No connectors.
|
|
Technicians Installation and Service Kit
|
00-1545
|
Protector Service Kit
|
Kit containing all connectors, terminals and removal tools for Installer series harnesses. Individual components may be refilled in bulk and labeled for quick re-order. Components and connectors are chosen to ensure the highest quality of installation.
|
|
|
